2T 2m Wire Rope Manual Tensioner Ratchet Double Hook Tensioner Winch Fastener Rope Rope Tensioner For Car Cargo
2T 2m Wire Rope Manual Tensioner Ratchet Double Hook Tensioner Winch Fastener Rope Rope Tensioner For Car Cargo
SPECIFICATIONS
Brand Name: buyready
Hign-concerned Chemical: none
Origin: Mainland China
Type: Manual
Certification: none
Model Number: 2t
Material: Alloy Steel
Wire rope tensioner | |||||
Specifications | Wire rope length | two hook lengths | Wire ropediameter | Active end decoupling | |
tighten | pull apart | ||||
1T | 2m | 0.45m | 2.2m | 4mm | single rope |
2T | 2m | 0.47m | 1.3m | 4mm | Double rope sling hook |
4T | 2m | 0.62m | 1.95m | 5mm | Double rope sling hook |
Wire rope tensioner
(1) it is used for tightening the ground wire or traction equipment in power engineering and telecommunication engineering, and for pulling wires.
(2) high strength steel wire is used, which is not easy to be broken, and the hook head is forged with alloy steel. And the hook head part is oval with safety device, which is beautiful and has high strength.
(3) the handle can rotate 360 °, and the control latch can rotate backward, which is convenient to use.
Usage: can adjust sag with tension.
Features: it can be loosened or tightened in both positive and negative directions, and the wrench can rotate 360 °.
Double hook thread tightener: it includes hook shaped screw rod, screw nut, sleeve, safety pin, ratchet, handle assembly and lock plate. A safety pin is set at the end of the hook shaped screw rod to prevent the screw nut from detaching when the hook shaped screw rod is rotated out; The head of the hook shaped screw rod is provided with a lock plate to prevent the steel strand or steel wire rope from popping out of the hook when hanging. The two hook shaped screw rods are left and right T-shaped screw rods, which are screwed into the two left and right T-shaped screw nuts respectively, and the two left and right T-shaped screw nuts are screwed into the outer walls at both ends of the sleeve through triangular threads. The ratchet wheel is installed in the middle of the sleeve, and a handle assembly is installed outside the ratchet wheel. A pawl that can change the direction is installed in the handle assembly. Pulling the handle can drive the sleeve to rotate through the ratchet wheel. Changing the engagement position of the pawl and the ratchet wheel can make the ratchet wheel rotate forward or reverse, and make the hook screw screw screw into or out of the sleeve, so as to achieve the purpose of tensioning or loosening. This thread tightener is safe and reliable to use and easy to operate.